2002-06 Nissan Altima QuickLIFT Installation Guide
2002-06 Nissan Altima QuickLIFT Installation Guide
amp, ball studs, centerline, fender brackets, hammer, locking nuts, manuals, masking tape, nissan, nissan altima, permanent marker, quicklift, rt, socket wrench, step 3, tape measure, washers
Website: www.redlinetuning.com | Filesize: 3707kb
No of Page(s): 4
2002-06 Nissan Altima QuickLIFT Installation Guide
Step 1 – Unpack QuickLIFT system and verify contents.
Remove all items from the packing tube. You should have the following before beginning:
* (1) Gas springs – Part No. RT-QL-200-5A
* (2) Threaded ball studs
* (4) Washers
* (2) Locking nuts
* (2) fender brackets and steel rivets
* Printed Color Instructions
Step 2 – Gather the required tools.
Please gather the following tools before you begin the installation:
* Power Drill
* 5/16? & 3/16? drill bits – SHARP and NEW!
* 13mm socket and socket wrench
* 1/2? open end wrench
* Rivet gun
* hammer and center punch
Step 3 – Mark fender bracket centerline.
A. Gather masking tape, tape measure and a permanent marker.
B. Measure from the front corner of the fender as shown to right 10? and place mark on the fender tape – use this line to place the bracket at the centerline of the ball stud at a later step.
2002-06 Nissan Altima QuickLIFT Installation Guide
Popularity: 4% [?]
Free Auto Manuals: nissan, NISSAN owners manual, NISSAN user guide
